April 16, 2017
openHAB is a Java-based platform (developed in parallel with Eclipse Smarthome, on which it is based) that provides interface, control, and automation functionality for your home. It supports many devices and networks through “bindings”, including Z-Wave. A rules engine provides for automation, and several user interfaces are available.
Since HomeAssistant doesn’t support the scene control features of the HS-WD100+, I decided to give openHAB 2 a shot.
It works reliably once configured.
Until you get to that point, it’s a hot mess…
April 12, 2017
The HS-WS100+ or HS-WD100+ HomeSeer switches both support multi-way configurations. This will not work with standard three-way switches, however; instead, you need the HS-WA100+.
Note that this switch is not a Z-Wave device, does not directly control a load, and will not work without one of the aforementioned HomeSeer switches. If you’re looking for just a remote Z-Wave switch without load control, you should look elsewhere.
April 7, 2017
The HomeSeer HS-WS100+ is a best-in-class Z-Wave wall switch. It uses a mechanical relay, which means you can switch almost any load within reason. It even supports three-way operation with the HS-WA100+ companion switch.
And like the HomeSeer dimmer, it includes additional scene control functionality, making this a very versatile addition to your home automation system.
March 31, 2017
I’ve been waiting for weeks now for HomeSeer to get their excellent Z-Wave dimmers and companion switches back in stock. They finally did earlier this week, and my wallet is feeling the pain…
Shipping was prompt; I ordered them on Tuesday with standard ground shipping, and — to my shock — they arrived this afternoon. Now my weekend is utterly doomed…
March 4, 2017
Sensative Strips are thin devices that you can install on a door or window to detect the open or closed state. They’re small, they’re functional, and amazingly enough, they speak Z-Wave. Install one on the frame of your door, and you have a nice little sensor without having to run wires.
I got mine from a seller on Amazon.
They’re also fiddly little things, at least when pairing with OpenHAB…
March 3, 2017
If you can’t get your hands on a HomeSeer HS-WD100+, the GE 12724 is a nice alternative. It doesn’t have a visual indication of the dim level, and it doesn’t support multi-tap scene control, but it’s comparable in most other ways.
So long as you can get beyond the crappy status reporting, that is…
February 27, 2017
I’m mainly looking at OpenHAB for support of the advanced functionality in the HomeSeer HS-WD100+ in-wall dimmers. Specifically, they have multi-tap functionality supporting four commands in addition to the generic On/Off function. For example, my pool light switch is out by the shed; wouldn’t be nice if I could just double-tap the switch at the back door instead?
Here’s one way of making it work in OpenHAB 2…
February 24, 2017
I’m in the process of evaluating alternative solutions to the Wink (I really want the Central Scene functionality for the HomeSeer Switches!). After a brief foray into HomeAssistant (which doesn’t support it either), I decided to try OpenHAB 2. It’s early in that process, but so far it looks promising.
Unfortunately, ESXi has an issue or three with USB passthrough support.
February 19, 2017
The HomeSeer HS-WD100+ In-Wall Dimmer is widely recognized as one of the best Z-Wave dimmers currently available. It has the functionality one would expect of a dimmer, plus additional scene control abilities via double- and triple-tap operations on either the top or bottom paddle. Pairing is simple, but advanced features may not be available with some hubs.
February 8, 2017
The Leviton DZR15 outlet provides a convenient method of controlling loads without having a separate module cluttering things up. This unit installs in place of a standard wall outlet and provides two sockets: one switched, and one unswitched.
The unit is very easy to pair with most home automation hubs.
February 4, 2017
The Leviton DZS-15 is a Z-Wave switch designed for on/off control of 15 Amp 120VAC loads. It supports a wide range of loads, and supports 3-Way operation with the addition of a remote companion switch. Pairing with the Wink (and presumably other hubs) is simple.
January 24, 2017
I’ve always been interested in home automation. In the olden days, this meant X10 — which meant bulky, slow, and unreliable. Modern technologies have changed this, however; From Apple HomeKit to Z-Wave, the choices are endless. Most are also far faster and more reliable than X10.
The local Home Despot had the Wink 2 in stock, so I decided to give it a shot.